Heat Exchanger Equipment
Contact Us
Contact Us
产品详细
Plate
Plate heat exchanger plates are specially used in plate heat exchangers to isolate media and perform heat exchange, and are an important part of plate heat exchangers. Its main materials are stainless steel (SUS304.316), titanium and titanium palladium (Ti, Ti-Pd), 20Cr, 18Ni, 6Mo (254SMO), alloy (C276), copper (H68), etc.
Plate heat exchanger plate composition: each plate contains two parts:
1. Metal plate: It is a thin metal plate with corrugations, sealing grooves and corner holes, which is an important heat transfer element. Corrugation not only enhances heat transfer, but also increases the rigidity and rigidity of the thin plate, thereby improving the pressure-bearing capacity of the plate heat exchanger, and because it promotes the liquid to be in a turbulent state, it can reduce the formation of sediments or dirt and play a certain "Clean" effect.
2. Sealing gasket: installed in the groove of the gasket along the periphery of the plate, sealing the periphery between the plates to prevent fluid leakage, and sealing a part of the corner holes according to the design requirements, so that the cold and hot liquids flow according to their own Road flow
Plate material:
Plate material |
Suitable for fluids |
Stainless steel (SUS304.316 etc.) |
Water purification, river water, edible oil, mineral oil |
Titanium and titanium palladium (Ti, Ti-Pd) |
Sea water, salt water, salt |
20Cr,18Ni,6Mo(254SMO) |
Dilute sulfuric acid, sparse salt solution, inorganic solution |
Nickel (Ni) |
High temperature, high concentration caustic soda |
HASTELLOY alloy (C276, D205, B2G) |
Concentrated sulfuric acid, hydrochloric acid, phosphoric acid |
ONLINE / MESSAGES
Tel:0534-2580017 / 400-0534-017
E-Mail:1133231096@163.com
版权信息
CopyRight © 2020 Youxin Group ICP: 鲁ICP备18012254号-1 Powered by www.300.cn